- Tissue Punch
- Bone Flattening Drill
- Guide Drill
- Drill Extension
- Drill Tube
- Initial Drill
- Profile Drill
- Bone Profile Drill
- Final Drill
- Tap Drill
- Abutment Profile Drill
- Connector Extension
- Implant Connector
- Screw Driver
- Square Screw Driver
- Torque Wrench
-
Kit composed of drill with outstanding cutting force and durability, ect. UF II Narrow ø3.0 ø3.3 UF(II) Regular ø3.8 ø4.0 ø4.5 ø5.0 Fixture Guided Sleeve: GS 53 Includes:
-
Exclusive kit consisting of a drill with excellent cutting power and durability, enabling the implantation of an all-in-one mini implant of the protem.
-
Crestal Approach Technic Sinus Technic based on low-speed drilling (10rpm) and stopper that perforates the inferior cortical wall and lifts the membrane safely and quickly Includes:
- ∅ 2.0 Drill Stopper
- Sinus Round Drill
- ∅ 3.2 Drill Stopper
- Depth Gauge & Bone Condenser
- Membrane Lifter
- Square Wrench
- Membrane Lifter Tube (*syringe sold separately)
-
Custom tray is used for pick-up type of impression taking. . Asymmetry structure to minimize close interruption . Uses 1.2 Hex Driver . Length : 10mm . Packing unit : pick-up impression coping + Guide Pin
-
UFII Narrow Ø3.0 Ø3.3 Guide Sleeve: GSL 36, GS36 Includes:
- Tissue Punch
- Bone Flattening Drill
- Guide Drill
- Initial Drill
- Drill Tube
- Profile Drill
- Final Drill
- Abutment Profile Drill
- Implant Connector
- Connector Extension
- Screw Driver Machine
- Screw Driver Ratchet
- Square Screw Driver
-
UF II Wide Ø5.5 Ø6.0 Ø6.5 Fixture Guide Sleeve : GS 68GN Includes:
- Tissue Punch
- Bone Flattening Drill
- Drill Tube
- Guide Drill
- Final Drill
- Profile Drill
- Tap Drill
- Connector Extension
- Abutment Profile Drill
- Implant Connector
- Square Screw Driver
-
Experience the difference in precision, durability, and cutting force with our swiss made master surgical kit that is a complementary fit with our DIO UFII Implant system. · Kit composed of a drill with outstanding cutting force and durability, etc. · UFII Starter Kit Ø2.0 Ø2.7 Ø3.0 Ø3.2 Ø3.8 Ø4.5
-
Includes:
- Internal Guide
- External Guide
- Fixture Removing Driver
- 1.2 Hex Removing Driver
- Remove Bar
- Reverse Cutting Drill
- Screw Guide Tap
-
Surgical Protocol Lateral Approach Technic Crestal Approach Technic Includes:
- Ø2.0 Initial Drill
- Round Drill
- Stopper (depth of the drill)
- Membrane Lifter
- Depth Gauge
- Bone Condenser
- Round Drill
- Core Drill
-
Uses 1.2 Hex Driver Uses 0.5 Slot Driver Tightening Torque: 5-8Ncm
-
•Use in the case of no reference teeth •Use when CT taking for digital implant surgery •Packing unit : 1 set (30EA)These work will for aligning the denture for guided surgery
-
-
Torque wrench for prosthetics- It could be used from UF(III) surgical kit or is required to purchase separately because of not including in DIOnavi. master kit
-
-
The cortical bone is further drilled in D1 and D2 bones, and excessive placement torque is prevented.
-
-Implant is placed according to depth of the fixture and direction of the internal hex planned in advance -Recommended use of UF(II) Narrow : 20 times / Be careful about excessive torque of 50Ncm or above. UFII Narrow - 1.7 Hex UFII Regular - 2.5 Hex UFII Wide - 2.5 Hex
-
DIO TRAUS SIP10 provides state of the art technology and optimized performance with a BLDC Motor (0-40,000rpm) and contra angle handpiece. Features : - Optic LED Function. - Ergonomically designed with visible LCD Display. - Combined with the TRAUS Optic Angle provides excellent durability. - Handpiece has controllable grip that allows for easy usage.
-
- Made of thermoplastic material to acquire the information of occlusion and patient’s gingiva easily. For edentulous patients. Easily reform according to oral shape. Enable intra oral scan.
- Packing unit : 1 piece
-
- Made of thermoplastic material to acquire the information of occlusion and patient’s gingiva easily
- For edentulous patients (Full Arch)
- Easily reform according to oral shape
- Enable intra oral scan
- Packing unit : 1 piece
-
1. Prevention of gingiva creeping ¡¤ Covering of gum in the margin and gingiva retraction ¡¤ Can accurately take impression with widened gum 2. Protection of the patient's tongue ¡¤ Since the protect cap can fall off while biting food with antagonist teeth (sticky food, etc.), be careful not to swallow the cap if fallen.
-
▶ Used to protect abutment in the patient’s mouth and minimize the discomfort for the patient. · Can be applied to substructure of temporary prosthesis. · Convenient locking mechanism.
-
Providing anchor point for fabricating implant prosthetics on working model. Replicates implant for the fabrication of prosthetics on the working model. * Non-medical devices
-
Provides Anchor point for ball abutment on working model. Length : 10mm
-
▶ Octa Abutment is formed on working model. ※ Non-medical devices
-
Abutment of cement retained type that uses dental cement to fix prosthesis in place .Abutment and screw are in one-piece structure HDS 4506A | HDS 5506A | HDS 6506A HDS 4512A | HDS 5512A | HDS 6512A
-
The healing abutments are designed to help gum tissue around the implant site heal faster. Used for making designated shape of gingiva. ▶ Used if the fixture is deeply placed Used for small diameter abutment like Ball abutment ※ When connecting the cover screw and healing abutment, the screw can be separated easily by applying antibiotics functioning as lubricant. (Antibiotics: Minocline, Periocline, etc.) Uses 1.2 Hex Driver Uses 0.5 Slot Driver Tightening Torque: 5-8Ncm
-
- Used to modify the fixture's path mainly used for anterior teeth
- For Cement retained type of abutment
- Depending on the angle slope, it is categorized into 15' and 25' Angled Abutment
- Availability of A type and B type of hex part overcomes the limitation of direction of the abutment
-
▶ Used to create screw retained prosthesis on poor path bridge case. · Convert internal connection to external connection, and then use cylinder on it for prosthesis. · Uses Octa Abutment Driver (HD 3006A-Short / HD 3012A-Long) · Packing Unit : Octa Abutment + Abutment Holder (Convenient to install in patient's Mouth.) · Tightening Torque : 30~35Ncm
-
SLA / Packing unit: Fixture | Order code : Produce code + SF (ex: UF(II) 3808SF) Fixture & Coverscrew | Order Code : Product Code + S (ex: UF(II) 3808S Fixture Mount + Mount Screw + Fixture + Cover Screw | Order Code : P+ Product Code + S (ex: PUF(ii) 3808S) UV Active / Packing Unit: Fixture
-
· After the customization, non-precious metal alloy will be casted only. · Hex / Non-Hex type · Uses 1.2 Hex Driver · Packing Unit : Abutment + Abutment Screw ( N UNSAS 1407H, R W SSC 2008H) · Tightening Torque : 30~35Ncm ※ Non-medical devices
