-
. Usage for laboratory fabricated abutment level cast model . Length : 15mm . Diameter : ø4.8
-
Custom tray is used for pick-up type of impression taking. . Asymmetry structure to minimize close interruption . Uses 1.2 Hex Driver . Length : 10mm . Packing unit : pick-up impression coping + Guide Pin
-
- Used to modify the fixture's path mainly used for anterior teeth
- For Cement retained type of abutment
- Depending on the angle slope, it is categorized into 15' and 25' Angled Abutment
- Availability of A type and B type of hex part overcomes the limitation of direction of the abutment
-
Used to create over-denture for edentulous patient. Used when fixed type prosthesis is difficult due to severe bone or soft tissue loss. . Composition of O-ring : for dental lab use (black), for clinic use (orange). . Path recovery to the maximum of 20°. . Post partis coloring in gold . Uses Ball Abutment driver . Packing unit : Ball abutment + Abutment holder + O-Ring (Orange for clinic use) . Tightening Torque: 20Ncm (Narrow) , 30-35Ncm (Regular & Wide)
-
Provides Anchor point for ball abutment on working model. Length : 10mm
-
. Outstanding consistency and Clip-on . Packing Unit : Ball Cap + O-Ring (OR-0450B / OR0450O) . Length : 4mm . Diameter : ø5.0
-
Screw/Cement-Retained Cylinder · Depending on the connection, categorized as Octa/Non-Octa type · Uses 1.2 Hex Driver · Packing Unit : Cemented Cylinder + Cylinder Screw · Tightening Torque : 20Ncm
-
To easily obtain a scanned image of provisional bridge and to merge the image of connection part of cylinder accurately • Only for multi abutment • Use holder, guide pin or cylinder screw to tighten to cylinder • Packing unit : Cylinder scan body • Tightening torque : 5~8Ncm
-
. After checking the thickness of the residual bone and whether the membrane is lifted, push in the bone into the lifted sinus. . After separating the Guide, Make sure to use it attaching the Stopper.
-
DIO Digital Fixture Analog (Print model) (DAU 4509) Regular/Wide 4.5x9mm
-
1. Prevention of gingiva creeping ¡¤ Covering of gum in the margin and gingiva retraction ¡¤ Can accurately take impression with widened gum 2. Protection of the patient's tongue ¡¤ Since the protect cap can fall off while biting food with antagonist teeth (sticky food, etc.), be careful not to swallow the cap if fallen.
-
Providing anchor point for fabricating implant prosthetics on working model. Replicates implant for the fabrication of prosthetics on the working model. * Non-medical devices
-
1x UF(II) Master kit 1x UF(II) Sinus kit 1x UF(II) Narrow kit 1x UF(II) Wide kit 1x Prosthetic Kit
-
Uses 1.2 Hex Driver Uses 0.5 Slot Driver Tightening Torque: 5-8Ncm
Quick Links
UPCOMING EVENTS
© Copyright 2023 | All Rights Reserved DIO USA Corporation | Orange County Web Design