-
. Usage for laboratory fabricated abutment level cast model . Length : 15mm . Diameter : ø4.8
-
Custom tray is used for pick-up type of impression taking. . Asymmetry structure to minimize close interruption . Uses 1.2 Hex Driver . Length : 10mm . Packing unit : pick-up impression coping + Guide Pin
-
- Used to modify the fixture's path mainly used for anterior teeth
- For Cement retained type of abutment
- Depending on the angle slope, it is categorized into 15' and 25' Angled Abutment
- Availability of A type and B type of hex part overcomes the limitation of direction of the abutment
-
Used to create over-denture for edentulous patient. Used when fixed type prosthesis is difficult due to severe bone or soft tissue loss. . Composition of O-ring : for dental lab use (black), for clinic use (orange). . Path recovery to the maximum of 20°. . Post partis coloring in gold . Uses Ball Abutment driver . Packing unit : Ball abutment + Abutment holder + O-Ring (Orange for clinic use) . Tightening Torque: 20Ncm (Narrow) , 30-35Ncm (Regular & Wide)
-
Provides Anchor point for ball abutment on working model. Length : 10mm
-
. Outstanding consistency and Clip-on . Packing Unit : Ball Cap + O-Ring (OR-0450B / OR0450O) . Length : 4mm . Diameter : ø5.0
-
Screw/Cement-Retained Cylinder · Depending on the connection, categorized as Octa/Non-Octa type · Uses 1.2 Hex Driver · Packing Unit : Cemented Cylinder + Cylinder Screw · Tightening Torque : 20Ncm
-
To easily obtain a scanned image of provisional bridge and to merge the image of connection part of cylinder accurately • Only for multi abutment • Use holder, guide pin or cylinder screw to tighten to cylinder • Packing unit : Cylinder scan body • Tightening torque : 5~8Ncm
-
. After checking the thickness of the residual bone and whether the membrane is lifted, push in the bone into the lifted sinus. . After separating the Guide, Make sure to use it attaching the Stopper.
-
DIO Digital Fixture Analog (Print model) (DAU 4509) Regular/Wide 4.5x9mm
-
1. Prevention of gingiva creeping ¡¤ Covering of gum in the margin and gingiva retraction ¡¤ Can accurately take impression with widened gum 2. Protection of the patient's tongue ¡¤ Since the protect cap can fall off while biting food with antagonist teeth (sticky food, etc.), be careful not to swallow the cap if fallen.
-
Providing anchor point for fabricating implant prosthetics on working model. Replicates implant for the fabrication of prosthetics on the working model. * Non-medical devices
-
1x UF(II) Master kit 1x UF(II) Sinus kit 1x UF(II) Narrow kit 1x UF(II) Wide kit 1x Prosthetic Kit
-
Uses 1.2 Hex Driver Uses 0.5 Slot Driver Tightening Torque: 5-8Ncm
-
The healing abutments are designed to help gum tissue around the implant site heal faster. Used for making designated shape of gingiva. ▶ Used if the fixture is deeply placed Used for small diameter abutment like Ball abutment ※ When connecting the cover screw and healing abutment, the screw can be separated easily by applying antibiotics functioning as lubricant. (Antibiotics: Minocline, Periocline, etc.) Uses 1.2 Hex Driver Uses 0.5 Slot Driver Tightening Torque: 5-8Ncm
-
Screen: 18" Touchscreen Size : 203 x 163 x 72 mm Components : DIO IDX, Smart Peg Mount, Charger, Test Peg *The SmartPeg is used together with the measurement instruments DIO IDx. (Sold separately)
-
OsstellConnect is an exclusive and free online service associated with IDx and can be accessed by IDx user only. It provides relevant insights of your daily implant treatment performance.
(OsstellConnect complies with relevant data security regulations, like HIPAA
-
-Implant is placed according to depth of the fixture and direction of the internal hex planned in advance -Recommended use of UF(II) Narrow : 20 times / Be careful about excessive torque of 50Ncm or above. UFII Narrow - 1.7 Hex UFII Regular - 2.5 Hex UFII Wide - 2.5 Hex
-
. Implant is placed according to depth of the fixture and direction of the internal hex planned in advance. . Recommended use of UF(II) narrow : 20 times / be careful about excessive torque of 50Ncm or above.
-
HSA (Hybrid SLA) Hex ø2.5 Apex ø2.9 , ø3.4, ø3.9, ø4.5
-
HSA (Hybrid SLA) Hex ø1.7 Apex ø1.6 ø3.0 fixture exclusive for anterior teeth ø1.6 ø3.3 fixture exclusive for anterior teeth ø1.9
-
SLA / Packing unit: Fixture | Order code : Produce code + SF (ex: UF(II) 3808SF) Fixture & Coverscrew | Order Code : Product Code + S (ex: UF(II) 3808S Fixture Mount + Mount Screw + Fixture + Cover Screw | Order Code : P+ Product Code + S (ex: PUF(ii) 3808S) UV Active / Packing Unit: Fixture
-
The membrane lifter is used to inject saline solution into the osteotomy site.
-
MNTL (Standard) - length from tip to bend is 25mm and from bend to connection end 25mm MNTE (Extensions) - length from tip to bend is 30 mm and from bend to connection end 50mm
Quick Links
UPCOMING EVENTS
© Copyright 2023 | All Rights Reserved DIO USA Corporation | Orange County Web Design